Nikwax TX.Direct Wash-In 300ml

Nikwax TX.Direct Wash-In 300ml


STOCK# 106131

Availability: In Stock


The No.1 easy to use, safe, high performance wash in waterproofing for wet weather clothing. Adds Durable Water Repellency and revives breathability - in a washing machine. >>> Alternative waterproofing products are often solvent-based aerosols; alternatively, they may be water-based and use fluorocarbons. Aerosol products are flammable. Fluorocarbons pose a potential risk to the environment and to the long-term health of the consumer. Nikwax TX.Direct® is a safe product to use on breathable waterproof fabrics. It is WaterBased, non-flammable, contains no volatile organic compounds (VOCs) and is fluorocarbon free. Nikwax TX.Direct® has been specifically designed and optimized for breathable waterproof clothing, providing Durable Water Repellency (DWR) while maintaining breathability. Nikwax TX.Direct® requires no heat to develop its DWR, so it is not necessary to use a tumble drier for best results. As garments with taped seams get older the tape adhesion weakens, becoming more fragile and susceptible to heat, so it is best to avoid tumble drying. >>>Using the right cleaning product is as important as using the right waterproofing product. Conventional detergents leave behind a thin water-absorbent film on materials, which masks their Durable Water Repellency (DWR). Therefore, always clean your waterproof garments with Nikwax Tech Wash®. Remember that dirt itself works against DWR, so regular cleaning will enhance performance.



>Use in a washing machine: >For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing. >>Remove all detergent build up from the detergent dispenser. >>Place maximum of 2 clean garments in washing machine. >>Use 100ml per garment. >>Run 30°C synthetic cycle and slow spin. >Do not machine-wash garments if taped seams have become dislodged.* To maintain waterproofing always wash with Nikwax Tech Wash. Do not use detergents. *Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying. >Use by hand: >>Use gloves (to avoid waterproofing your hands!). >Immerse 1 clean garment in 6L of hand-hot water in a bowl or sink. >Add 50ml of TX.Direct®. >Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly. >Rinse with cold water until water runs clear. > Nikwax TX. Direct treated clothing needs no heat to develop Durable Water Repellency (DWR) Air dry or tumble dry on a low setting if care label allows.